Third-Party Detectors Via Esserbus - Honeywell ESSER 8010 Operation And Installation Instructions Manual

12.4 Third-party detectors via esserbus

LMST 8010 - 19-Inch series 3
Third-party detectors, e.g. the line-type smoke detector Fireray 50 RV (Part No. 761315) or 100 RV
(Part No. 761316) are connected to the Extinguishing Control Computer 8010 - series 3 via the esserbus
transponder (Part No. 808613.10).
System limits
•
Max. one third-party detector per esserbus
•
Up to 4 third-party detectors per esserbus
•
2-detector coincidence within a monitoring area is possible.
FIRERAY
50 RV / 100 RV
12 - 24 V DC
0V / GND
Alarm
trouble
*
Cable screen must be connected to appropriate terminals !
In accordance to Standards and requirements only a single detection area may fail.
Refer to the transponders manual or the Third-party detector Reference Guide for details.
FB 798955.GB0 / 09.07
®
transponder to a single zone of the LMST 8010.
®
transponder in a single monitoring area.
ext. power supply
-
red
black
R
NO yellow
COM blue
NC
white
COM green
Plug w ith cable (lenght a pprox . 50cm )
Extinguishing Control Computer 8010 – 19-Inch
®
transponder to
+
X12
X13
ALARM
1K
R
END
10K
X1
X15
K2 K1
X16
808613.10
X14
X11
X2
10K 10K
Analog loop
®
10K
75