Honeywell ESSER 8010 Operation And Installation Instructions Manual page 29

The D-SUB plugs on the housings rear side are connected via a 50-pole cable (length 1m or 2m) with the
external terminal card on the C-rail.
Observe the different connectors for zones
housings rear side when connecting the external terminal card.
Zone terminal card
Zones
50-pole D-SUB jack
Relay terminal card
Relays
50-pole D-SUB plug
All required terminals are located on the external terminal card. The connection of cables to the
separate circuit boards inside the housing of the Extinguishing Control Computer 8010 is not
necessary.
FB 798955.GB0 / 09.07
1 2
Cable length 2m
Extinguishing Control Computer 8010 – 19-Inch
2
(D-SUB jack) and relays
1
(D-SUB plug) at the
Zone terminal card
50-pole D-SUB plug
Relay terminal card
50-pole D-SUB jack
29