Analog Loop Connection - Honeywell ESSER 8010 Operation And Installation Instructions Manual

Extinguishing Control Computer 8010 – 19-Inch
9

Analog loop connection

The Extinguishing Control Computer 8010 could be directly connected to the analog loop (esserbus
®
esserbus -Plus) of the Fire Alarm System 8000 / IQ8Control.
The analog loop terminals are located on the external terminal card of the zones.
Up to eight Extinguish Control Computer 8010 (= 8 Extinguishing areas) could be connected to a single analog
loop of the Fire alarm system.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
esserbus
Fig. 47: Terminals to connect the analog loop wiring (type Phoenix)
To ensure a proper operation the cable shielding of the analog loop must be connected. For this
purpose one of the shielding-terminals of the detector zone terminal card may be used.
66
21 22 23 24
- + - +
PE
UL- in
UL+ in
®
UL- out
UL+ out
25 26
FB 798955.GB0 / 09.07
®
/