Keypad Functions - Honeywell ESSER 8010 Operation And Installation Instructions Manual

Extinguishing Control Computer 8010 – 19-Inch
2.3

Keypad functions

All operations of the Extinguishing Control Computer are carried out with the clear control panel keypad.
Pressing a key once is acknowledged by a short buzzer tone.
When the keypad cover is closed, all keys are covered apart from the two keys >Switchover< and >Buzzer Off<.
The keys can be locked with the built-in key-switch to prevent unauthorized operation.
Unlocked
Switchover
Lamp test
1
Zone
4
Output
7
Disconnection
Fig. 6: Control panel keypad of the Extinguishing Control Computer 8010
Unlocked
12
In operation
Buzzer off
Panel reset
2 3
On
5 6
Off
8 9
Test operation
0
In operation
Keypad locked, green LED >Operation<
lights up continuously.
Keypad enabled, green LED >Operation<
flashes.
FB 798955.GB0 / 09.07