Clutch Inspection - Honda Acura NSX 1991 Service Manual

Compressor
Clutch Inspection
Check pulley bearing play and drag by rotating the
1 .
pulley by hand. Replace the pulley with a new one
if it is noisy or has excessive play/drag.
2 . Check resistance of the field coil:
Field Coil Resistance: 3.6f0.2 ohm at
If resistance is not within specifications, replace the
22-80
3. Measure the clearance between the pulley and pres-
sure plate all the way around. If the clearance is not
within specified limits, the pressure plate must be
removed and shims added or removed as required,
following the procedure on the next page.
CLEARANCE: 0.5 -+ 0.15 (0.020 _+ 0.006 in)
NOTE: The shims are available in three sizes: 0.1
mm, 0.2 mm and 0.5 mm of thickness.
PULLEY