Honda Acura NSX 1991 Service Manual page 381

Transmission
5. Install the spring washer, then insert the mainshaft
and countershaft into the shift forks and install
them as an assembly.
NOTE: Tape the mainshaft spline, before instal-
lation.
MAINSHAFT
ASSEMBLY
SPRING WASHER
6. install the change holder assembly in the clutch
housing.
NOTE: Plate the interlocker finger in the groove of
the select arm.
6 x 1 .O mm SPECIAL BOLTS
16 N-m (1.6 kg-m, 11 lb-ft)
13-44
INTERLOCKER FINGER
7. Lift the mainshaft assembly, then install the
reverse idle gear shaft assembly with the spring pin
matching the groove of the clutch housing.
REVERSE IDLE ;oEAR
SHAFT ASSEMBLY
8. Shift the reverse shift fork to the driven gear side.
Lift the mainshaft assembly and reverse idle gear
shaft assembly, then install the reverse shift fork
assembly.
REVERSE SHIFT FORK
ASSEMBLY