Clutch Disc, Clutch Plate Replacement - Honda Acura NSX 1991 Service Manual

Clutch
Disc, Clutch Plate
NOTE: The clutch disks and clutch plates should be
replaced as a set.
1.
Remove the clutch discs and clutch plates.
(See page 15-6).
2. Soak the clutch discs for five minutes in transmis-
sion oil.
3. Install the clutch discs, clutch plates and a stan-
dard shim.
112 mm THRUST SHIM
J ) 4 1270-PR8-000
shim
3.0 mm (0.1181 in.)
<Reference>
Measure @: 41.7-41.9 mm
(1.6417-1.6496
4. install the differential case.
NOTE: Tighten the bolts evenly in several steps,
then torque them in a criss-cross pattern.
Torque: 40 N-m (4.0 kg-m, 29 lb-ft)
5. Make sure the preset torque is within the standard.
(See page 15-4).
6. If preset torque is beyond the standard, replace the
112 mm thrust shim as necessary.
in)