Fail Safe Relay - Honda Acura NSX 1991 Service Manual

Troubleshooting
Troubleshooting Flowchart (cont'd)
(From page 19-124)
Turn the ignition switch OFF.
Disconnect the 4-P connector
from the fail-safe relay.
Check for continuity between the
No. 2 terminal of the 20-P con-
nector for the TCS control unit
and No. 3 of the 4-P connector for
the fail-safe relay.
Check for continuity between the
NO
Check for poor connections or
19-l 26
Repair open in the REDlBLK wire
between the TCS control unit and
fail-safe relay.
Repair short in the RED/ BRK wire
to the body ground.
4-P CONNECTOR
View from terminal side