Replacement
1 .
Fold the trunk floor trim panel forward and remove the 2 bumper mounting nuts.
2.
Remove the 2 bumper mounting nuts on each side from under the trunk floor.
3. Lower the inner fender.
4.
Remove the under covers and skirt mounting bolts from inside the rear fender on each side.
5.
Remove the 2 bumper mounting nuts on each side.
6.
Remove the bumper assembly by sliding it to the rear.
NOTE:
MOUNTING
NUT
l . O m m
10 N*m (1 .O kg-m, 7 lb-W
B
REAR
U M P E R
ASSEMBLY
7.
Installation is the reverse order of removal.
22 N-m (2.2 kg-m, 16 lb-ft)
BUMPER MOUNTING NUT
22 Nom (2.2 kg-m,
16 lb-ft)
FLOOR TRIM PANEL
10 N-m (I .O kg-m, 7 lb-ft)
INNER FENDER
UNDER COVER