Clutch Master Cylinder Removal; Installation - Honda Acura NSX 1991 Service Manual

Clutch Master Cylinder
Removal
1. Pry out the cotter pin, and pull the pedal pin out of
the yoke.
2. Remove the nuts and bolts attaching the master
cylinder and remove the cylinder from the engine
compartment.
3. Remove the clutch pipe and reservoir hose from the
master cylinder.
CAUTION:
damage the finish.
hose with a shop towel to prevent fluid from
flowing out of the clutch pipe and reservoir hose
after disconnecting.
MASTER CYLINDER
RESERVOIR HOSE
ASSEMBLY

Installation

1.
COTTER PIN
Replace
HOSE JOINT
IO Nom (1.0 kg-m, 8 lb-ft)
RESERVOIR
Install the clutch master cylinder in the reverse
order of removal.
NOTE: Bleed the clutch hydraulic system (page
RESERVOIR CAP
VO
RESER
ID N-m (1.0 kg-m, 8 lb-ft,--$Qi@d.
IR
12-5