In-Car Temperature Sensor - Honda Acura NSX 1991 Service Manual

7. Pull the parking brake handle all the way up, iift the
panel and disconnect the 2 connectors from it, then
carefully lift the panel off past the shift lever.
Remove the center console panel.
CENTER CONSOLE
PANEL
8. Remove the screws (41, then pull out the control
unit, disconnect its connectors and remove it
from the dashboard.
CLIMATE
CONTROL. UNIT
The in-car temperature sensor assembly
fan (aspirator fan) to draw air past the sensor.
SRS wire harness is routed near the console.
are colored yellow. Do not use electrical test equipment
on these circuit.
CAUTION: Be careful not to damage the SRS wire
harnesses
1 .
2.
SRS CONTROL
UNIT
All SRS wire harnesses and connectors
when servicing the console.
Remove the center console panel as described in
step 1 - 7 in the first column (Climate Control Unit).
Remove the mounting screws 12) and remove the
in-car temperature sensor from the under side of the
console panel.
Be careful not to damage the console panel.
IN-CAR
SENSOR
UNDER SIDE bF CENTER
CONSOLE PANEL
includes a small
TEMPERATURE