Remove The Connector Holder From The Tcs Control Unit, And Disconnect The Antenna Lead - Honda NSX-T 1998 Manual

Main Menu
Troubleshooting Procedures
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS
section 24 before performing repairs or service.
1. Remove the seat back panels (see
2.

Remove the connector holder from the TCS control unit, and disconnect the antenna lead.

3. Remove the TCS control unit.
NOTE: Do not disconnect the connectors from the TCS control unit.
4. Disconnect the B (22P) connector from the TCM, then remove the TCM.
NOTE: Do not disconnect the A (26P) connector from the TCM while removing the TCM.
Table of Contents
section 20).