II. EXTERNAL COVERS
1. Rear Cover
1) Remove 5 screws
while removing the upper hooks (2 places
on the right and left sides), remove the rear
cover
2
.
Figure 3-201
General precaution
Place the main body on a flat, sturdy surface
when disassembling and reassembling. If it is
placed on an inclined table, the base or upper
unit may be deformed when the external
cover is removed.
COPYRIGHT © CANON ELECTRONICS INC. 2008
1
(round tips), and
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
2. Right Cover
1) Remove the rear cover.
2) Remove 4 screws
rear and the side.
Figure 3-202
3) With the upper unit closed, remove 1 screw
(self-tapping). With the upper unit open,
1
remove 2 screws
Figure 3-203
1
(round tips) on the
(self-tapping).
2
3-3