Check Device; Sleep - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 5 TROUBLESHOOTING

11. Check Device

This mode is used to check the versions
of the main body firmware and the internal
devices of this machine.
When [Check Device] is selected on the
service screen, the version screen is dis-
played.
Figure 5-331
5-24

12. Sleep

This mode is used to check and change
the time until the machine enters the sleep
mode. It is set to "after 10 minutes" at the
factory setting. It can also be changed in the
user mode.
When [Sleep] is selected on the service
screen, a setting screen is displayed. Change
the setting as required and press the [OK]
button.
COPYRIGHT © CANON ELECTRONICS INC. 2008
Figure 5-332
CANON DR-X10C FIRST EDITION