Pickup Document Guide - Canon imageFORMULA DR-X10C Service Manual

Notes on assembling
When assembling the pickup tray unit in
the main body, do not hit it against the in-
side of the right and left side plates to
prevent damage to painted surfaces.
Since a damper is built in the raising and
lowering drive unit for the pickup tray unit,
put both hands on the top of the pickup tray
unit and push it downward slowly and
uniformly on the right and left sides.
When assembling the pickup tray unit, be
careful not to tilt it to the right or left and
ensure that it is not tilted to the right and
left.
Install the lock shaft by aligning the D-cut
shape of the end with the hole in the side
plate.
Figure 3-214
COPYRIGHT © CANON ELECTRONICS INC. 2008

6. Pickup Document Guide

1) Remove the pickup tray unit.
2) Remove 4 screws
Note: At this time, the pickup tray cover and
3) Remove 3 screws
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
(Page 3-6)
1
and remove the document guide unit
pickup tray extension are also de-
tached.
Figure 3-215
1
and remove the cover
Figure 3-216
(M4, self-tapping)
2 .
(M4, self-tapping)
2 .
3-7