Upper Unit-2 (Electrical System); Main Drive Pcb - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
VII. UPPER UNIT-2 (ELECTRICAL SYSTEM)

1. Main Drive PCB

1) Remove the eject tray unit.
(Page 3-10)
2) Remove the cables connected to the main
drive PCB 1 .
Then, remove 6 screws
tips), and while unhooking 3 pairs of the
fitting parts , remove the main drive
3
PCB (with the frame LED PCB).
Figure 3-701
3-46
(M3, round
2
COPYRIGHT © CANON ELECTRONICS INC. 2008
3) Remove 2 frame LED PCBs
main drive PCB
Note: Both frame LED PCBs are same parts.
Figure 3-702
2 from the
1 .
CANON DR-X10C FIRST EDITION