Wrong Image Size; Image Skews - Canon imageFORMULA DR-X10C Service Manual

3. Wrong Image Size

There are borders around the image, or some of the image is missing.
Note: Set the document size to "Auto-detection" when scanning stack of different size documents.
Cause/faulty
location
"Page Size" setting
Document setting
Setting of
"Auto-detection"
Reading glass of frame
detection unit

4. Image Skews

If the document skews when fed, the scanned image also skews.
Cause/faulty
location
Document setting
"Deskew" setting
Document feeding
COPYRIGHT © CANON ELECTRONICS INC. 2008
Step Check item
1 Is the "Page Size" properly
set?
2 Is the document set at the
correct position?
3 Is "Auto-detection" set?
4 Are the reading glasses
clean?
Table 5-604
Step Check item
1 Is the document properly
set?
2 Are the document guides
adjusted to fit the document
width?
3 Is the "Deskew" set?
4 Is the document fed
straight?
Table 5-605
CANON DR-X10C FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Result Action
NO Change the setting.
NO Set at the correct posi-
tion.
NO Set it.
NO Clean the reading
glasses.
Result Action
NO Properly set the docu-
ment.
NO Adjust them in a correct
position.
NO Set it.
Slant can be corrected
by image processing.
NO Carry out check items
listed in "Documents Are
Not Fed Properly".
5-35