Individual Adjustments - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 5 TROUBLESHOOTING
6) When the adjustment is finished, the
progress screen disappears and the
service screen appears.
It takes approx. 1 minute to finish.
Errors
If an anomaly occurs in the adjustment
value while executing this mode, an error
screen is displayed, and adjustment is
interrupted. If an error screen is dis-
played, select [OK] in the screen to stop
adjustment. Then after checking the
operating procedure, perform adjust-
ment again. If adjustment is interrupted,
the adjustment value remains the value
prior to adjustment.
Sample error screens are shown below.
Figure 5-306
If the computer gets uncontrollable dur-
ing use of the service mode including
this mode, reset both the scanner and
the computer.
5-10

5. Individual Adjustments

This section describes the following indi-
vidual adjustment items. If all the 2 adjust-
ments are performed, use [All Adjustment]
described in the previous section.
•
[LED Adjustment]
•
[Regist Adjustment]
COPYRIGHT © CANON ELECTRONICS INC. 2008
Figure 5-307
CANON DR-X10C FIRST EDITION