1. Manuals
  2. Brands
  3. Canon Manuals
  4. Scanner
  5. imageFORMULA DR-1210C
  6. User manual

Canon imageFORMULA DR-1210C User Manual

Document scanner
Hide thumbs Also See for imageFORMULA DR-1210C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Document Scanner
User's Guide
Please read this manual before using this unit. After you finish
reading this manual, keep it in a safe place for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon imageFORMULA DR-1210C

Summary of Contents for Canon imageFORMULA DR-1210C

  • Page 1 Document Scanner User’s Guide Please read this manual before using this unit. After you finish reading this manual, keep it in a safe place for future reference.
  • Page 2 Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
  • Page 3 AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON. Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon’s local affiliate.

  • Page 5: Introduction

    INTRODUCTION Thank you for purchasing the Canon DR-1210C document scanner. Please read this manual thoroughly before using the machine to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.

  • Page 6: Symbols Used In This Manual

    Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.

  • Page 7: Table Of Contents

    Moving the Scanner ... 7 Handling ... 7 Disposal ... 9 2. Features of the DR-1210C Document Scanner ... 10 3. Names and Functions of Parts ... 12 4. Installation Requirements ... 16 5. About the Setup Disc ... 17 Chapter 2 Using the Scanner ...
  • Page 8 Documents Are Not Fed Correctly ... 68 Saved Image Files Do Not Open ... 69 Scanning Results Are Not as Expected ... 69 [Warming up] Is Displayed When Scanning ... 71 3. Uninstalling Software ... 75 Uninstalling ISIS/TWAIN Driver or Job Registration Tool ... 77 Uninstalling CapturePerfect 3.0 ...

  • Page 9: Before Using The Scanner

    Chapter 1 Before Using the Scanner 1. Important Safety Instructions ... 6 Installation Location ... 6 Power ... 6 Moving the Scanner ... 7 Handling ... 7 Disposal ... 9 2. Features of the DR-1210C Document Scanner ... 10 3. Names and Functions of Parts ... 12 4.

  • Page 10: Important Safety Instructions

    1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements.

  • Page 11: Moving The Scanner

    • Keep the area around the power plug clear of objects so that the power cord can be disconnected easily in an emergency. • Use only the AC adapter provided with this scanner. Also, do not use the AC adapter provided with the scanner with any other electrical devices.
  • Page 12 • Do not use power cords and AC adapters other than the power cord and AC adapter provided with this scanner. • Never try to take the scanner apart or modify it in any way. • Never try to take the AC adapter apart or modify it in any way, as this is dangerous and may lead to a fire or electric shock.

  • Page 13: Disposal

    • Do not locate the scanner in a humid or dusty location. Doing so might cause fire or electric shock. • Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury.

  • Page 14: Features Of The Dr-1210C Document Scanner

    Deskew If a document is fed through the scanner as crooked, the scanned image is corrected so that it is aligned as straight. Advanced Text Enhancement Documents with dark backgrounds or documents with faint text written in pencil can be scanned clearly.

  • Page 15: Prescan Function

    Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again.

  • Page 16: Names And Functions Of Parts

    3. Names and Functions of Parts This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner. Top View Document Feed Tray Open this tray to place your documents into the feeder.

  • Page 17: Back View

    Place your document face down and align it with the alignment mark in the top left corner. (See p. 23.) Power Connector Connect the AC adapter that is provided with the scanner. ADF (Automatic Document Feeder) Connector (See CAUTION) Before Using the Scanner...

  • Page 18: Operation Panel

    Press this button to scan a document and attach the scanned image to a new e-mail message. Display Panel Displays jobs registered with the Job Registration Tool, the scanner state (e.g., Scanning...), and system messages. (Display Panel Normal Messages) The scanner is waiting for a button or PC operation...
  • Page 19 (e.g., the USB cable is disconnected) Paper jam Lock switch on the bottom of the scanner is locked (See p. 7 and p. 67) ADF Connector on the rear of the scanner is disconnected (See p. 13 and p. 67)

  • Page 20: Installation Requirements

    IMPORTANT • Use the most recent version of the USB 2.0 driver provided by Microsoft. Contact your local authorized Canon dealer or service representative for more detailed information. • Computer operations are not guaranteed with all standard equipped computer USB interfaces.

  • Page 21: About The Setup Disc

    5. About the Setup Disc The Canon DR-1210 scanner setup disc contains the software listed below: • DR-1210C Driver Scanner driver for use with the DR-1210C scanner, and the Job Registration Tool • CapturePerfect 3.0 ISIS-compatible application developed for Canon document scanners •...
  • Page 22 Before Using the Scanner...

  • Page 23: Using The Scanner

    Chapter 2 Using the Scanner 1. Documents ... 20 2. Placing Documents ... 21 Placing a Document into the Feeder ... 21 Placing a Document on the Flatbed (Platen Glass) ... 23 3. Scanning Documents ... 25 Using CapturePerfect 3.0 ... 25 Using the Job Function ...

  • Page 24: Documents

    1. Documents The scanner can scan documents of the following sizes: Feeder Width: 5.8" to 8.5" (148 mm to 216 mm) Length: 3.9" to 14.0" (100 mm to 356 mm) Thickness: 14 to 32 lb bond (0.0024" to 0.0059") 52 to 128 g/m...

  • Page 25: Placing Documents

    These objects may damage the document, or cause a paper jam or scanner malfunction. • Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result in personal injury. Be extra careful of neckties and long hair.
  • Page 26 Scanning an improperly placed, curled, or folded document may damage the document or cause a paper jam. Using the Scanner Make sure to remove any previously scanned documents remaining in the document eject opening. Document Eject Stopper Open to prevent documents from falling off the scanner.

  • Page 27: Placing A Document On The Flatbed (Platen Glass)

    Never place any object other than documents to be scanned onto the platen glass. Doing so may result in damage to the scanner or an injury. Place the document face down and align the top edge of the document with the back edge of the platen glass (by the alignment mark in the top left corner).
  • Page 28 • Do not press down hard on the feeder when using the platen glass to scan thick books. Doing so may damage the platen glass and result in personal injury. Using the Scanner...

  • Page 29: Scanning Documents

    For details on how to install each application and the driver, see the Easy Start Guide. Using CapturePerfect 3.0 CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners. CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the scan menu to perform scanning.
  • Page 30 • Scan to Presentation Mode This mode is handy when the scanner is used in environments, such as conference halls, where it can be connected to large displays or projectors. CapturePerfect 3.0 is switched to full-screen display, the document is scanned, and the scanned image is displayed at full size on the screen.

  • Page 31: Captureperfect Operational Procedures

    CapturePerfect Operational Procedures This section describes how to start up CapturePerfect 3.0, select the scanner, and the procedure up to scanning with Scan Batch to File. For details, see the CapturePerfect Operation Guide and CapturePerfect Help. Click the Windows [Start] button, and then click [Programs] ([All Programs] for Windows XP) [CapturePerfect 3.0]...
  • Page 32 2. Select [Canon DR-1210C] click the [OK] button. Note If [Canon DR-1210C] is not displayed in the list of scanners, re-install the ISIS/TWAIN Driver. (See “Step 3. Installing the Software” in the Easy Start Guide.) 3. Set the “Default Page Size”.
  • Page 33 On the [Scan] menu, click [Scanner Setting]. The ISIS Driver setup dialog box opens. Set the scan settings. For details setting the scanning settings, see “ISIS Driver Settings,” on p. 50, and ISIS/TWAIN Driver Help. Note If you want to scan a document using the flatbed (platen glass), set the [Paper Source] setting to [Flatbed].
  • Page 34 Place your document. (See “Placing Documents,” on p. 21.) On the [Scan] menu, select [Scan Batch to File]. The [Scan Batch to File Setting] dialog box opens. For more details on how to scan documents, see the CapturePerfect Operation Guide and CapturePerfect Help. Using the Scanner...
  • Page 35 For details on the available settings in the Scan Batch to File Setting dialog box, see the CapturePerfect Operation Guide and CapturePerfect Help. Note When scanning immediately after turning on the scanner or when the scan lamp is off, wait until [Warming up] appears on the PC’s monitor before scanning.
  • Page 36 After scanning is complete, select [Exit] on the [File] menu to quit CapturePerfect 3.0. Using the Scanner...

  • Page 37: Using The Job Function

    Scanned images are saved Scanned images to the specified folder. are sent by e-mail. (Mail Server) Attaching to E-Mail (E-MAIL) The e-mail software is started up, and the scanned image is attached to a new e-mail message. Using the Scanner...

  • Page 38: About The Job Buttons

    [START]. • Scroll buttons [ ] [ ] The displayed job can be selected by pressing the Scroll buttons to scroll through the list jobs. To perform a displayed job, press [START]. Using the Scanner Scroll buttons...

  • Page 39: About The Job Registration Tool

    Settings,” on p. 54, and Job Registration Tool Help. Note To start up the Job Registration Tool, click the Windows [Start] button [Programs] ([All Programs] for Windows XP) Registration Tool]. Job button settings Selectable Job button assignments click [Canon DR-1210C] [Job Using the Scanner...

  • Page 40: Executing Job Functions

    “Sending complete” is displayed on the display panel. Note When executing a job immediately after turning on the scanner or when the scan lamp is off, wait until [Warming up] appears on the PC’s monitor before executing the job.
  • Page 41 Note If Feeding Option in the scanner setup is set to [Auto-detection] or [Panel- Feeding], the message “Waiting” is displayed on the display panel after scanning is complete. In this case, perform one of the following operations: • When Feeding Option is set to [Auto-detection] Place another document on the feeder to resume scanning, or press [STOP] on the operation panel to end scanning.

  • Page 42: Use The Start Button To Start Applications

    [START] on the operation panel. All applications that are compatible with the event function are enabled in the initial status immediately after the scanner is set up. The following dialog box opens when [START] is pressed if the scanner is in the “Ready” state.
  • Page 43 2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category View) Control Panel (classic View) 3. Click [Scanners and Cameras]. Printers and Other Hardware Using the Scanner...
  • Page 44 4. Select [Canon DR-1210C USB], and then click [Properties]. 5. Click the [Events] tab. Select [Scan Button] from the [Scanner events] drop-down list. All of the applications displayed in “Send to this application:” are checked. Using the Scanner...
  • Page 45 Do not check this checkbox. Note Certain applications may not run normally when started as an event. Click [OK] to close [CANON DR-1210C USB Properties]. Restart Windows to enable the new settings for the event function. click [Apply] to save your changes.

  • Page 46: Clearing A Paper Jam

    Open the feeder cover to check for jammed paper. Note If there is no jammed paper inside the feeder cover, check the back of the feeder and the document eject opening. Using the Scanner Document Feed Tray Document Eject Opening Jammed Paper...
  • Page 47 Should the paper tear, make sure to remove any torn pieces remaining in the scanner. • To remove a document from the supply side (the back of the feeder), raise the paper release lever ( ) and then carefully remove ( ) the jammed document.
  • Page 48 Carefully close the feeder cover until it clicks into place. Press [STOP] to clear the error message display. Note After removing the jammed paper, check to see if the last page of your document was scanned correctly, and then continue scanning. Using the Scanner...

  • Page 49: Scanning Hints

    5. Scanning Hints This section describes helpful hints for setting up and using your scanner. Refer to these hints when you set up the ISIS/TWAIN Driver. For more details on items not described in this section, see “Software Settings,” on p. 49.

  • Page 50: Scanning Multiple Documents

    If the [Feeding Option] is set to [Automatic Feeding] and the next document is loaded, the scanner starts scanning when it detects the next document. If the [Feeding Option] is set to [Panel-Feeding] and the next document is loaded, the scanner starts scanning when the [START] button is pressed.

  • Page 51: Adjusting Scanned Images

    Check the [Punch Hole Removal] checkbox. See “ISIS Driver Settings t,” on p. 50, and “TWAIN Driver Settings s,” on p. 52. Using the Scanner...
  • Page 52 52. With CapturePerfect 3.0 Scan JOB function, the scan mode can also be registered with the scanning conditions as a job, and scanning can be performed by selecting the job and then executing the scan job. Using the Scanner...

  • Page 53: Software Settings

    A “Quick Guide” containing the same content as this section of the PDF file version of the User’s Guide is available on the setup disc. Print this guide and keep it near the scanner as a reference. Using the Scanner...

  • Page 54: Isis Driver Settings

    Advanced Settings Dialog Box Opens the Gamma Settings dialog box to adjust gamma correction. Click the [Help] button to see details of the settings in the Gamma Settings dialog box. Using the Scanner Save User Preferences Mode * [Contrast] is set...

  • Page 55: Basic Setup Dialog Box

    Selects the document feeding method. [Standard Feeding] scans all loaded documents after starting scanning from the application program. [Panel-Feeding] scans all loaded documents after the scanner’s scan button is pressed. [Automatic Feeding] starts scanning whenever the feeder detects a loaded document.

  • Page 56: Twain Driver Settings

    Advanced Settings Dialog Box Opens the Gamma Settings dialog box to adjust gamma. Click the [Help] button to see details of the settings in the Gamma Settings dialog box. Using the Scanner Save User Preferences Mode * [Contrast] is set automatically when Advanced Text Enhancement is selected.
  • Page 57 [Panel-Feeding] scans all loaded documents when scanning is started by pressing the scanner’s scan button. [Automatic Feeding] starts scanning when the feeder detects a loaded document. i Prescan When scanning starts, one document is scanned and its image is displayed in the Prescan window.

  • Page 58: Job Registration Tool Settings

    [PDF] or [TIFF] is selected. Print Attach to E-mail Send by E-mail Selectable Job Button Settings Dialog Box Using the Scanner Register Folder SMTP method Admin Dialog Box Function * Dialog box contents depend on the selected function.

  • Page 59: Job Registration Tool Dialog Box

    The contents of the Editing dialog box are determined by the selected function. j Scanner setting Opens the TWAIN driver’s basic setting dialog box to configure the scanner. k Save to My Pictures folder Saves scanned images in the My Pictures folder in My Documents.
  • Page 60 Using the Scanner...

  • Page 61: Appendices

    Contact Plate ... 59 Cleaning the Roller Unit and Separation Pad ... 60 2. Troubleshooting ... 65 The Scanner Does Not Turn On ... 65 The Scanner Is Not Recognized ... 65 Scanning Is Not Performed ... 66 Error Is Displayed ... 67 Slow Scanning Speed ...

  • Page 62: Regular Maintenance

    After finishing a large scan job, you should turn OFF the scanner and clean out any paper particles that are remaining.

  • Page 63: Cleaning The Scanning Glass And Contact Plate

    Cleaning the Scanning Glass and Contact Plate If your scanned images contain lines or smudges, or if the scanned documents are dirty, then the scanning glass or the contact plate inside the scanner may be dirty. Clean them periodically. Carefully open the feeder.

  • Page 64: Cleaning The Roller Unit And Separation Pad

    Carefully close the feeder. CAUTION Close the feeder gently to avoid catching your hands, as this may result in personal injury. Cleaning the Roller Unit and Separation Pad If your scanned images contain lines or smudges, or if the scanned documents are dirty, then the roller unit or separation pad may be dirty.
  • Page 65 Carefully open the feeder cover. Lift up the roller unit lock lever. Hold the roller by the center and remove the roller by first lifting the shaft up from the lock lever side (a) and then pulling it out of the notch at the opposite side (b).
  • Page 66 Grasp both sides of the separation pad and pull it up remove it. Moisten a cloth with plain water, wring out the excess water, and then wipe the roller and separation pad to clean them. Attaching the Roller Unit and Separation Pad Push the separation pad back into the slot.
  • Page 67 Attach the roller unit by following steps : Align the pin on the roller unit shaft with the notch on the scanner side and insert it. : Set the lock lever in place with the lever pointing upwards.
  • Page 68 The Separation Pad and Roller Unit are consumable components. The Separation Pad and the Roller Unit need to be replaced if cleaning them does not produce a visible improvement. Contact your local authorized Canon dealer or service representative, to replace the Separation Pad as the first step to solve your scanning problem.

  • Page 69: Troubleshooting

    [Warming up] Is Displayed When Scanning...P. 71 If, after consulting this section, you still cannot resolve the problem, contact your local authorized Canon dealer or your service representative. The Scanner Does Not Turn On Check the following if the scanner does not turn on: •...

  • Page 70: Scanning Is Not Performed

    • Is there a problem in the computer system? IMPORTANT • If documents are not scanned normally even if the scanner setup is OK, a probable cause is that the scanner driver or application software is not running correctly. Re-install the scanner driver or application software.

  • Page 71: Error Is Displayed

    Probable causes are as follows when an error appears on the display panel. Try the solutions according to the various causes. Error display Problem The lock switch on the bottom of the scanner is locked. Solution Unlock the lock switch and press the [STOP] button to clear the error. (See p. 7.) Error...

  • Page 72: Documents Are Not Fed Correctly

    The Separation Pad and Roller Unit are consumable components. The Separation Pad and the Roller Unit need to be replaced if cleaning them does not produce a visible improvement. Contact your local authorized Canon dealer or service representative, to replace the Separation Pad as the first step to solve your scanning problem.

  • Page 73: Saved Image Files Do Not Open

    If there is a problem with the scanning result (e.g., the scanned image is not clear, or the image is striped or dirty), the probable causes are incorrect ISIS/ TWAIN Driver settings or a problem with the scanning unit inside the scanner. Scanning results can also become skewed if the ISIS/TWAIN Driver has not been installed correctly, or the application in use does not support ISIS/ TWAIN Driver functions.
  • Page 74 Maintenance,” on p. 58.) Scratches on the scanning glass can also cause lines or smudges to appear on the scanned image. If this happens, contact your local authorized Canon dealer or service representative. Symptoms The scanned image is abnormal for certain documents.

  • Page 75: [Warming Up] Is Displayed When Scanning

    [Warming up] is displayed until the lamp turns on and its output is stabilized after the scanner’s power is turned on or when the scanner comes out of the power saving feature. The length of time that [Warming up] is displayed varies depending on the conditions of the lamp.
  • Page 76 2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category View) Control Panel (classic View) 3. Click [Scanners and Cameras]. Appendices Printers and Other Hardware...
  • Page 77 4. Select [Canon DR-1210C USB], and then click [Properties]. 5. Click the [CCFL Control] tab. Select 12, 36, or 60 minutes as the length of time before the lamp turns off. Note The default setting for the length of time before the lamp turns off is [12 mins].
  • Page 78 Click [OK] to close [Canon DR-1210C USB Properties]. Restart Windows to enable the new settings. Appendices...

  • Page 79: Uninstalling Software

    3. Uninstalling Software If the ISIS/TWAIN Driver, “Job Registration Tool,” and “CapturePerfect 3.0” are not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the DR-1210C setup disc. (See “Step 3. Installing the Software,” in the Easy Start Guide.) IMPORTANT Be sure to log on as an administrator when using Windows 2000 Professional or Windows XP.
  • Page 80 Double-click [Add/Remove Programs]. Note For Windows XP, double-click [Add or Remove Programs]. The [Add/Remove Programs Properties] dialog box appears. Note For Windows XP, the [Add or Remove Programs] dialog box appears. From the list in the dialog box, select the application you want to delete click [Change/Remove].

  • Page 81: Uninstalling Isis/Twain Driver Or Job Registration Tool

    Uninstalling ISIS/TWAIN Driver or Job Registration Tool From the Programs list in the dialog box, select [Canon DR-1210C Scanner Driver] (or [DR-1210C Job Tool] The [Confirm File Deletion] screen appears. Click the [Yes] button. The [Remove Shared File ?] dialog box appears.
  • Page 82 Click the [Yes] button to start uninstallation. Note All deleted shared files can be reinstalled by installing the software again. After uninstall is complete, click the [OK] button to exit the uninstaller. Appendices...

  • Page 83: Uninstalling Captureperfect 3.0

    Uninstalling CapturePerfect 3.0 Select [CapturePerfect 3.0] from the list in the dialog box [Remove] button. The delete file confirmation screen appears. Click the [Yes] button. Uninstallation starts. click the Appendices...
  • Page 84 After uninstallation is complete, click the [Finish] button to exit the uninstaller. Appendices...

  • Page 85: Specifications

    Power consumption Maximum power Low power mode Power SW OFF Noise Operating environment ADF/flatbed scanner Width: 5.8" to 8.5" (148 to 216 mm) Length: 3.9" to 14.0" (100 to 356 mm) Thickness: 14 to 32 lb bond (0.0024" to 0.0059") 152 to 128 g/m (0.06 to 0.15 mm)

  • Page 86: Replacement Parts

    • For details on replacing the roller unit and separation pad, see “Cleaning the Roller Unit and Separation Pad,” on p. 60. • Contact your local authorized Canon dealer for detailed information about replacement parts. Specifications are subject to change without notice.

  • Page 87: External Dimensions

    External Dimensions 18.6" (471 mm) 1.1" (28 mm) Appendices...

  • Page 88: Index

    About the Job Registration Tool ... 35 Executing Job Functions ... 36 Lock Switch ... 7, 12 Manuals for the Scanner ... 1 Moving the Scanner ... 7 Names and Functions of Parts ... 12 OmniPage SE 4 ... 17 Operating systems ...
  • Page 89 Troubleshooting ...65 Uninstalling Software ...75 USB Connector ...13 Warming up ...31, 36, 71 Index...
  • Page 90 Index...
  • Page 91 Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success NY 11042, U.S.A. Tel. No. (516)328-5600 RADIO INTERFERENCE REGULATIONS (For 120 V models) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the...
  • Page 92 CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC.
  • Page 93 Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box Batch Separation * Batch Separation is set to [None] when the [Flatbed] Paper Source is selected. * The Delay setting is available Feeding Option when the [Automatic Feeding] Feeding Option is selected.
  • Page 94 Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 1 1 1 1 User Preference Name and save your settings. Names can consist of up to 32 characters. 2 2 2 2 2 Mode Selects the scanning mode.
  • Page 95 Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box If an application program executes scanning directly from the basic setup dialog box, the [Scan] button is displayed instead of the [OK] button, and the [Area window] and [Preview] button are displayed in the Scan Area dialog box.
  • Page 96 Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 1 1 1 1 User Preference Name and save your settings. The name can consist of up to 32 characters. 2 2 2 2 2 Mode Selects the scanning mode.
  • Page 97 Keep this Quick Guide near the scanner for ready reference. Job Registration Tool Dialog Box New/Editing Dialog Box * For functions other than [Save as file], only the options that differ from [Save as file] are described below. Save as file...
  • Page 98 Keep this Quick Guide near the scanner for ready reference. Job Registration Tool Dialog Box 1 1 1 1 1 Job list Shows the registered jobs. 2 2 2 2 2 Job button settings Configures the Job Buttons on the scanner's operation panel.

This manual is also suitable for:

1211b002 - dr 1210c

Table of Contents