Precautions - Canon imageFORMULA DR-X10C Service Manual

3. Precautions

This section describes items that require
particular care, for example, regarding human
safety.
These precautions must be observed.
The user should be explained the items that
relate to user safety and instructed to take
appropriate actions.
1) Power OFF in emergency
If such abnormal conditions as extraordi-
nary noise, smoke, heat and odor occur,
immediately unplug the power cord.
Be careful not to get clothing (ties, long
hair, etc.) caught in the machine as it may
cause injury. Should this occur, immedi-
ately unplug the power cord. Do not insert
fingers in the feed section while moving
the rollers.
2) Power OFF on disassembling
When disassembling and assembling are
performed, unplug the power cord.
3) Prohibition of modify
This machine must not arbitrarily be
modified or remade. If it is, use may be
forcibly suspended.
To change the specifications or disas-
semble and reassemble this machine, fol-
low the instructions described in this
manual and the service information.
COPYRIGHT © CANON ELECTRONICS INC. 2008
4) Electromagnetic wave interference
5) "User Manual"
6) Disposal
7) Movement
CANON DR-X10C FIRST EDITION
CHAPTER 1 GENERAL DESCRIPTION
This machine complies with some stan-
dards regarding electromagnetic wave
interference, such as VCCI and FCC.
However, the user may have to take
countermeasures if the machine causes
electromagnetic wave interference.
Read each "User Manual" thoroughly prior
to use of this machine.
Follow local regulations when disposing of
the product and parts. This product is
subject to the WEEE Directive in Europe.
This machine weighs 39 kg. When lifting
or moving this machine, 2 persons must
hold it from both sides.
Figure 1-102
1-7