Unpacking And Installation - Canon imageFORMULA DR-X10C Service Manual

CHAPTER 4 INSTALLATION & MAINTENANCE

2. Unpacking And Installation

When metallic objects are brought from
a cold room into a warm room, small drops
of water may be formed on the surfaces.
This phenomenon is called condensation
and if the machine with condensation is
No.
1 Remove the box joints (4) and lift and
remove the cardboard box.
The packing weight is approx. 53 kg and
the dimensions are approx. 730 (L) × 700
(W) × 600 (H) mm.
Note:
1) Do not open the top of the cardboard
box, but remove the entire cardboard
box.
2) The cardboard box may not be able to
be removed if it contains accessories.
Check the inside.
4-2
Step
COPYRIGHT © CANON ELECTRONICS INC. 2008
used, various problems may take place.
Therefore, allow this machine at least one
hour to adjust to room temperature before
moving the machine from a cold room into a
warm room and installing it.
Details/Remarks
CANON DR-X10C FIRST EDITION