Table 4-1
Error Messages (continued)
Error/Warning
ID
Error/Warning Message
WID-5159
Some SRLGs cannot be set on CRS.
Please use Synchronize IPoDWDM to synchronize.
EID-5160
Maintenance state cannot be set on CRS.
Please use Synchronize IPoDWDM to synchronize.
EID-5161
Some of the effected routers could not be brought back into IS.
EID-5162
The circuit must be in the DISCOVERED state in order to start
a PPT.
EID-5163
Unable to retrieve the Shelf info.
EID-5164
Requested operation cannot be completed.
EID-5165
Unable to perform Maintenance synchronization operation.
EID-5166
Source is not fully specified.
EID-5167
Unable to set the Transport Admin State on the CRS {0}
EID-5168
Unable to set the Maintenance state for {0}
WID-5169
Some routers have responded not to start maintenance.
Do you still want to go ahead with the maintenance activity?
WID-5170
Some Transport Admin States cannot be synchronized.
Network operation might be inconsistent.
WID-5171
Some routers have not responded with Embargo status.
Continuing maintenance activity may be traffic affecting.
Are you sure you want to continue?
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.1 and Release 9.2
4-44
Chapter 4
Description
Cisco CRS node connectivity is down.
•
XML interface on the Cisco CRS is not
•
reachable.
Not enough memory on the Cisco CRS.
•
Cisco CRS node connectivity is down.
•
XML interface on the Cisco CRS is not
•
reachable.
Not enough memory on the Cisco CRS.
•
Cisco CRS node connectivity is down.
•
XML interface on the Cisco CRS is not
•
reachable.
Not enough memory on the Cisco CRS.
•
Refer to the error message text.
Complete node information could not be
retrieved.
Refer to the error message text.
The node name/node IP address or link
•
source/link destination information
could not be retrieved.
•
Cisco CRS node connectivity is down.
•
XML interface on the Cisco CRS is not
reachable.
Not enough memory on the Cisco CRS.
•
The node, shelf, or slot is not selected.
Cisco CRS node connectivity is down.
•
XML interface on the Cisco CRS is not
•
reachable.
Not enough memory on the Cisco CRS.
•
Complete node information could not be
retrieved.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Error Messages
78-19418-01