Cisco ONS 15454 Troubleshooting Manual page 34

Table 4-1 Error Messages (continued)
Error/Warning
ID Error/Warning Message
EID-4013 CAUTION: Reverting to an earlier software release may result
in TRAFFIC LOSS and loss of connectivity to the node. It may
requireonsite provisioning to recover.
If the node was running {0} before, reverting will restore the
{0} provisioning, losing any later provisioning. If the node was
running some other version, reverting will LOSE ALL
PROVISIONING.
{1}
{2}
{3}
EID-4014 The manual path trace mode for this equipment does not
support an expected string consisting of all null characters.
Please change the expected string or the path trace mode.
EID-4015 Software activation is in progress. Provisioning is not allowed. Refer to the error message text.
EID-4016 Software activation is in progress. {0} is not allowed.
EID-4017 Path Trace mode cannot be set at this endpoint.
The circuit is one-way.
WID-4018 {0} already exists.
Do you want to replace it?
EID-4019 Profile cannot be mapped because the UNI Port is not in
transparent mode.
EID-4020 Profile cannot be mapped because the transparent mode UNI
Port tagged VLAN is not {0}.
EID-4021 Profile cannot be mapped because SVLAN {0} is not enabled
for the NNI Port.
EID-4022 The user already exists.
EID-4023 Access control already exists for the group selected.
EID-4024 The View already exists.
EID-4025 Invalid Mask entry, cant be more then {0} the length of OID.
EID-4026 CTC was unable to create a new view.
EID-4027 Name and Subtree OID cant be empty.
EID-4028 Password will be sent as plain text.
EID-4029 The passwords must be at least {0} characters long.
EID-4030 The admitted SVLAN values must be in the range [1-4093].
EID-4031 On {0} interface the Recover from Fiber Cut Fails.
EID-4032 Link Integrity and L2 1+1 protection cannot operate on the
same interface.
WID-4033 No files were specified.
Please enter a valid file name.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.1 and Release 9.2
4-34
Chapter 4
Description
Refer to the error message text.
The path trace mode does not support
strings that consist of null characters. You
must either change the expected string or
the path trace mode.
Refer to the error message text.
Refer to the error message text.
Refer to the warning message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Error Messages
78-19418-01