Cisco ONS 15454 Troubleshooting Manual page 4

Table 4-1 Error Messages (continued)
Error/Warning
ID Error/Warning Message
WID-1044 Warning: there is a discrepancy in the build timestamp between
the NE cached jar file ({0}) and the NE ({1}).
Your CTC jar cache should be emptied.
EID-1046 Selected CTC version ({0}) must be greater than or equal{to
the login NE version ({1}).
EID-1047 No additional Pseudo IOS windows may be opened at this time.
The maximum number of Pseudo IOS windows are open.
EID-1048 This Pseudo IOS connection has been terminated.
Terminations are caused when the session has timed out, the
node resets, or when the exit command has been invoked.
This may also occur when the maximum number of concurrent
Pseudo IOS connections has been reached.
EID-1049 A Pseudo IOS connection cannot be opened right now on this
node.
Please try again later.
EID-2001 No rolls were selected. {0}
EID-2002 The roll must be completed or canceled before it can be deleted. You cannot delete the roll unless it has been
EID-2003 An error occurred while deleting the roll.
{0}
EID-2004 No Cisco IOS slot was selected.
EID-2005 CTC cannot find the online help files for {0}.
The files might have been moved, deleted, or not installed.
To install online help, run the setup program on the software or
documentation CDs.
EID-2006 An error occurred while editing the circuit(s).
{0}
{1}.
EID-2007 The preferences could not be saved.
EID-2008 The circuit preferences could not be saved:
{0}
EID-2009 CTC was unable to download the package:
{0}
EID-2010 An error occurred while deleting the destination.
EID-2011 The circuit could not be destroyed.
EID-2012 The reverse circuit could not be destroyed.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.1 and Release 9.2
4-4
Chapter 4
Description
Refer to the warning message text.
The CTC Software version must be greater
than or equal to the Software version on the
node being managed.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
No rolls were selected for the bridge and
roll.
completed or cancelled.
There was an error when CTC tried to delete
the roll.
You did not select a Cisco IOS slot.
CTC cannot find the online help files for the
specified window. The files might have
been moved, deleted, or not installed. To
install online help, run the setup program on
the software CD.
An error occurred when CTC tried to open
the circuit for editing.
CTC cannot save the preferences.
CTC cannot find the file needed to save the
circuit preferences.
Refer to the error message text.
CTC could not delete the destination.
CTC could not destroy the circuit.
CTC could not reverse the circuit destroy.
Error Messages
78-19418-01