Table of Contents
Advertisement
Advanced
The Advanced menu appears if you move the cursor to "Advanced."
To display a submenu, position the cursor on a selection that has a submenu (preceded by symbol
See the table below for the items.
Option
Parameter
Boot-time
[Disabled]
Diagnostic
Enabled
Screen
Reset
[No]
Configuration
Yes
Data
NumLock
On
[Off]
Memory/
[Boot]
Processor Error
Halt
Description
Specifies whether the self-diagnosis (POST)
running screen is displayed during boot.
If this item is set to "Disabled," a full-screen
logo appears during POST. (Pressing Esc at
that time displays the POST execution screen).
The Boot-time Diagnostic Screen is
automatically enabled if the Console
Redirection is enabled.
Select "Yes" to clear the extended system
configuration data area (system information
stored by POST). The parameter is
automatically changed to "No" after the system
has booted.
Specifies whether the numlock is enabled or
disabled at boot.
Indicates whether the POST stops at the
occurrence of a processor or memory error
during the execution of POST.
When a processor error or memory error is
encountered, the utility does not stop if this
item is set to "Halt", even when the "POST
Error Pause" of the "Server" menu is
"Enabled".
4-12
) and press Enter.
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
