Table of Contents
Advertisement
14.
Install the CPU protection cover.
Pass the cable through the cutout on the front of the protective cover. Then, engage the guides on the left and
right sides of the cover with the cutout of the server chassis.
15.
Start the SETUP and select "Yes" for [Reset Configuration Data] on the Advanced menu.
This setting is required to change the hardware configuration data. See Chapter 4 for details.
16.
To add one or more processors to the server in 1-processor configuration to operate the server with more than
one processor, do the procedure below:
For Windows Server 2003, change the driver of [Computer] in the device manager to [ACPI multi-processor
PC] and then update the system (see Chapter 5).
9-57
Advertisement
Table of Contents
