Table of Contents
Advertisement
LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) 2007 LSI Logic Corporation
HA -X (Bus X Dev X) MegaRAID SAS PCI Express(TM) ROMB
FW package: X.X.X-XXXX
X Logical Drive(s) found on the host adapter.
X Logical Drive(s) handled by BIOS
Press <Ctrl> <H> for WebBIOS
Now press Ctrl + H. The utility starts upon the POST completion.
NOTES:
Using WebBIOS allows you to build or change the RAID configuration with internal
SAS hard disk drives.
To build or change RAID configuration with SAS hard disk drives connected to the
LSILogic MegaRAID SAS 8480E Disk Array Controller, use the Universal RAID
Utility. WebBIOS does not support this feature.
The Onboard RAID Controller (MegaRAID ROMB) has a factory-installed battery. See
Chapter 8 for error messages related to the battery. See also "Battery for Onboard RAID
Controller (MegaRAID ROMB)" in Chapter 4.
5.
Displays the message notifying you of the detection of the processor and of the connected keyboard and
mouse.
6.
Displays any of the following messages.
Pattern 1:
Press <F2> to enter SETUP or <F12> to Network
Pattern 2:
Press <F1> to resume, <F2> to enter Setup, <F12> to Network
* The displayed message varies depending on the device status.
2-24
Advertisement
Table of Contents
