Table of Contents
Advertisement
PCI Hot Plug
To install the PCI board with the PCI hot plug
Select [Advanced] - [PCI Configuration] - [Hot Plug PCI Control] - [Minimum/Middle/Maximum*]
* The setting varies depending on the PCI board. See the table below.
Board name
1000Base-T Adapter (2ch)
1000Base-T Adapter
Saving the Configuration Data
To save the BIOS configuration data
Select [Exit] - [Exit Saving Changes] or [Save Changes].
To discard changes to the BIOS configuration data
Select [Exit] - [Exit Discarding Changes] or [Discard Changes].
To resume the default BIOS configuration data (may differ from factory-set value)
Select [Exit] - [Load Setup Defaults].
To save the current value as user defaults
Select [Exit] - [Save Custom Defaults].
To load the user-defined defaults
Select [Exit] - [Load Custom Defaults].
Setting Value
Minimum
Minimum
4-8
Advertisement
Table of Contents
