Table of Contents
Advertisement
INSTALLING Windows Server 2003 X64 EDITIONS
Preparations for Installation
EXPRESSBUILDER DVD
Microsoft Windows Server 2003 Standard x64 Edition (CD-ROM) / Microsoft Windows Server 2003
Enterprise x64 Edition (CD-ROM)
Microsoft Windows Server 2003 x64 Editions Service Pack 2 (CD-ROM)
User's Guide
Getting Started
Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER
Creating "Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER"
Before installing, create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER.
NOTE:
If you have already "Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER" for the server on which you are going to install Windows Server
2003 x64 Editions, you do not need to create it again.
You can create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER using one of the two procedures
below:
Create from the menu which appears when running the server with the EXPRESSBUILDER.
If you have only the server to create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER,
use this procedure.
If Windows Server 2003 or Windows can be operated on the server, you can use the other procedure described
later.
Follow the steps below.
1.
Prepare one 3.5-inch floppy disk.
2.
Turn on your server.
3.
Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive of the server.
4.
Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may also turn off and then
on again to reboot the server.)
The system will boot from the DVD-ROM and the EXPRESSBUILDER starts.
5.
Select [Create the OEM-Disk for Windows] from [Tools Menu] step.
6.
Select [Create an Windows Server 2003 x64 Editions OEM-Disk for EXPRESSBUILDER] at [Create
OEM-Disk] and click [Perform].
7.
Insert a floppy disk into the floppy disk drive according to the on-screen instructions.
Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.
D-3
Advertisement
Table of Contents
