Table of Contents
Advertisement
3.
Press the CD/DVD tray eject button or push the front of the tray lightly to retract it into the drive.
IMPORTANT: If a noisy sound is emitted by the CD-RW/DVD-ROM drive after setting a
CD/DVD-ROM, and set it again correctly.
To take out the media from the CD-RW/DVD-ROM drive, press the CD/DVD tray eject button to eject the tray. (If the
access LED is lit orange, the CD/DVD-ROM is being accessed and the CD/DVD tray eject button is disabled.) Some
OS have a command to eject a tray.
After taking out the CD/DVD-ROM, retract the tray into the drive.
If you fail to eject the CD/DVD-ROM tray with the CD/DVD-ROM tray eject button, follow the procedure below.
1.
Press the POWER/SLEEP switch to power off the server. (The POWER/SLEEP LED goes off.)
2.
Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a straightened large paper clip
will make a substitute) into the emergency hole on the upper front of the CD-RW/DVD-ROM drive and
gently push it in until the tray is ejected.
2-27
Advertisement
Table of Contents
