NEC NovaScale R480 E1 User Manual page 272

Event logs in using SNMP Service in Windows Server 2003
Event Type:
Event Source:
Event Category: None
Event ID:
Description:
Event Type:
Event Source:
Event Category: None
Event ID:
Description:
→ The system will not be affect by these event logs. SNMP will not be affected either, so these logs can
be ignored.
The Telnet Service is not installed.
→ Adjust the computer name to 14 characters or less, and then install the Telnet Service according to <How
to install the Telnet Service>.
<How to install the Telnet Service>
1.
Click [Run] on Start menu.
2.
Type "tlntsvr /service" in the [Open] box, and click [OK].
3.
Click the Start menu, point to [Control Panel], click [Computer Management] and then click [Services] to
specify whether the Telnet Service is registered.
* Once the installation of Telnet Service is finished, the computer name can be set to 15 characters or more.
Warning
EvntAgnt
1015
TraceLevel parameter not located in registry;
Default trace level used is 32.
Warning
EvntAgnt
1003
TraceFileName parameter not located in registry;
Default trace file used is XX.
8-49