Installing and Setting the Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
Using PROSet enables the following items:
Detailed information of the adapter confirmation.
Loop back test, packet transmission test diagnosis and so on.
Teaming setup.
Configuring several network adapters as one team provides the server with a tolerant environment and enhances
throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet.
1.
Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive.
2.
The [Windows Explorer] dialog starts.
* Procedure using a standard start menu
Click Start menu and click [Windows Explorer].
* Procedure using a classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "dxsetup.exe" in the following directory.
\001\win\winnt\dotnet\dl3\proset\win32
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4.
Click [Next].
5.
Choose "I accept the terms in the license agreement" and click [Next].
6.
Click [Next].
7.
Select [I accept the terms in the license agreement] and click [Next].
8.
Click [Install].
9.
When [InstallShield Wizard Completed] window is displayed, click [Finished].
10.
Restart the system.
NOTE: If you make no changes to the parameters, click the [Cancel] button to close the
dialog. Clicking the [OK] button will cause a temporary loss of network connectivity.
5-15