Table of Contents
Advertisement
How to change the settings value
On the [Adapter Properties] screen, change the parameter to the desired value, and then click [Submit].
The status of "Battery Backup" is indicated as "Present". Clicking [Present] opens the Battery Status screen shown
below.
IMPORTANT:
"Learn Delay Interval" values.
NOTES:
The Status field shows "Charging" when the battery is charged.
It shows "Discharging" when the battery is discharged.
When powering on the server after the battery replacement, the Status may not
immediately change to "Charging". In that case, leave the server powered on for several
hours, and check "Status" again.
You cannot change the "Auto Learn Period", "Next Learn Time", and
4-52
Advertisement
Table of Contents
