Motorola G24 Guide Developer's Manual page 592

AT Commands Alphabetical Summary
+MIPDATA
+MIPFLUSH
+MIPODM
+MIPOPEN
+MIPPUSH
+MIPRTCP
+MIPRUDP
+MIPSEND
+MIPSETS
+MIPSSL
+MIPSTAT
A-16
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This unsolicited event is sent
to the terminal indicating a
data comes from Network
when G24 is in
pseudo-command mode.
This command causes the G24
module to flush (delete) data
accumulated in its accumulating
buffers.
This command causes the G24
module to initialize a new socket
in Online Data Mode and open a
connection with a remote side.
This command causes the G24
module to initialize a new socket
and open a connection with a
remote side.
This command causes the G24
module to push the data
accumulated in its accumulating
buffers into the protocol stack.
This unsolicited event is sent to
the terminal when data is
received from the TCP protocol
stack.
This unsolicited event is sent to
the terminal when data is
received from the UDP protocol
stack.
This command causes the G24 to
transmit the data that the terminal
provides, using an existing
protocol stack.
This command causes the G24 to
set a watermark in the
accumulating buffer. When the
watermark is reached, data is
pushed from the accumulating
buffer into the protocol stack.
This unsolicited event is sent to
the terminal indicating an errors,
warnings or alerts that occurred
during SSL connection.
This unsolicited event is sent to
the terminal indicating a change
in link status.
AT Commands Reference Manual
Description
Page 3-401
Page 3-398
Page 3-389
Page 3-387
Page 3-397
Page 3-399
Page 3-399
Page 3-395
Page 3-394
Page 3-419
Page 3-400
Page
December 31, 2007