Colp, Connected Line Identification Presentation - Motorola G24 Guide Developer's Manual

+COLP, Connected Line Identification Presentation

This command relates to the GSM supplementary service called COLP (Connected Line
Identification Presentation), which enables a calling subscriber to obtain the connected line
identity (COL) of the called party after setting up a mobile-originated call with the G24. For
example, after setting up a mobile-originated call to one number that is forwarded to another
number, the calling party will see the number of that third party.
When this command is enabled (and the called subscriber permits it), the following intermediate
result code is returned:
+COLP: <number>,<type>[,<subaddr>,<satype>[,<alpha>]].
Note:
Command Type
Set
Read
Test
December 31, 2007
Table 3-35: CUSD Termination Cause Table Index (Cont.)
Termination Cause
NBR_SN_EXCEEDED
NBR_USER_EXCEEDED
Call Control by SIM Causes
NOT_ALLOWED_BY_CC
MODIFIED_TO_SS_BY_CC
MODIFIED_TO_CALL_BY_CC
CALL_MODIFIED_BY_CC
App. Cause
FDN_FAILURE
This command is activated when COLP is supported by the network.
Syntax
+COLP=<n>
+COLP?
+COLP=?
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
OK The Set command enables/disables the
display of the COL at the TE on the
+CME ERROR: <err>
G24. It has no effect on the execution
of the COLR supplementary service on
the network. The value set by this
command is not retained after a power
cycle.
+COLP: <n>,<m> The Read command displays the status
of <n>. It also initiates a query of the
+CME ERROR: <err>
COLP service provision status and
displays <m>.
+COLP: (list of The Test command displays the
supported <n>s) supported values of <n>.
+CME ERROR: <err>
Index
73
74
75
76
77
78
90
Remarks
3-69