Appendix A: Reference Tables; At Commands Alphabetical Summary - Motorola G24 Guide Developer's Manual

Appendix A: Reference Tables

This appendix contains the following sections:
•
AT Commands Alphabetical Summary, below
•
AT Commands Behaviour With UART2 Fully Functional,
•
Character Set Table CS1: (GSM -> UCS-2),
•
Character Set Table CS2: (ASCII <-> UTF-8),
•
Character Set Table CS3: (UCS-2 <-> UTF-8),
•
Character Set Table CS6: (UCS-2 Full Table),
•
Character Set Table CS7: (ASCII table),
Note:

AT Commands Alphabetical Summary

The following table contains an alphabetical list of all the G24 AT commands.
$
%C
&C
&D
&F
December 31, 2007
Character Set Table CS6: (UCS-2) is provided on CD due to its size.
Table A-1: AT Commands (Alphabetical)
AT Command
AT Commands Reference Manual
Page -31
Page -35
Page -35
Page -35
Page -35
Description
This command displays a list of
all the AT commands supported
by the G24.
This command is supported for
backward compatibility only, and
has no effect.
This command determines how
the state of the DCD line relates
to the detection of the received
line signal from the distant end.
This command determines how
the G24 responds when the DTR
(Data Terminal Ready) status is
changed from ON to OFF during
the online data state.
This command restores the
factory default configuration
profile.
Page -22
Page
Page 3-8
Page 3-422
Page 3-199
Page 3-201
Page 3-281
A-1