S94, Sidetone Effect - Motorola G24 Guide Developer's Manual

Example
AT+CMUT=?
+CMUT:(0-1)
OK
AT+CMUT?
+CMUT: 0
OK
AT+CMUT=1 uplink voice is muted
OK
AT+CMUT?
+CMUT: 1
OK
AT+CMUT =2
+CME ERROR: <err>

S94, Sidetone Effect

This command reduces the microphone audio input that is routed to the selected speaker, so that
people speaking will hear themselves talking (The default value of S94 is "1").
The following table explains the use of the ATS94 set.
ATS94
0
1
0
1
Command Type
Set
Read
Test
December 31, 2007
uplink voice is unmuted
Table 3-152: ATS94 and ATS96 Behavior
ATS96 Echo Cancel
0 Disabled
0 Disabled
1 Enabled
1
Enabled
Syntax Response/Action
ATS94=<n> OK
or:
+CME ERROR: <err>
ATS94? <000-disabled,
001-enabled>
OK
or:
+CME ERROR: <err>
ATS94=? +CME ERROR: <err>
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Noise Suppress
Disabled Disabled
Disabled Enabled
Enabled Disabled
Enabled Disabled
Remarks
The Set command sets the sidetone
status.
The Read command returns the
sidetone status.
The Test command displays the
supported values of <n>.
ST
3-235