Motorola G24 Guide Developer's Manual page 581

+CGEQREQ
+CGMI
+CGMM
+CGMR
+CGPADDR
+CGPRS
+CGQMIN
+CGQREQ
+CGREG
+CGSMS
+CGSN
+CHLD
+CHUP
+CIEV
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command allows the TE to
specify a EDGE Quality of
Service Profile that is used when
the MT sends an Activate PDP
Context Request message to the
network.
This command requests
manufacturer identification.
This command requests the
model identification.
This command requests the
revision identification.
This command reads the
allocated PDP addresses for the
specified context identifiers.
This command indicates whether
there is GPRS coverage.
This command sets the minimum
acceptable quality of service
profile.
This command returns the
requested quality of service
profile.
This command enables/disables
the GPRS network status
registration unsolicited result
code.
This command handles the
selection of the service or service
preference used by the G24 to
send mobile-originated SMS
messages.
This command requests the
product serial number
identification.
This command controls the Call
Hold and Multiparty
Conversation supplementary
services.
This command causes the G24 to
hang up the current GSM call.
An unsolicited indication
regarding various phone
indications that is sent to the DTE
when the <ind> parameter of the
+CMER command is set to 1.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-340
Page 3-1
Page 3-2
Page 3-3
Page 3-336
Page 3-334
Page 3-327
Page 3-329
Page 3-171
Page 3-133
Page 3-3
Page 3-25
Page 3-35
Page 3-321
Page
A-5