Motorola G24 Guide Developer's Manual page 304

Hardware Information
Command
Type
Read
Test
3-220
Syntax
AT+MMAD? List of converters and their
monitoring setup values:
+MMAD:
<Converter number>,
<Report>,<Rate>,<Low>,<High><
Num_of_samples>
<Average_calc_duration><Report_
interval><CR><LF>
<Converter number>,
<Report>,<Rate>,<Low>,<High>>
<Num_of_samples>
<Average_calc_duration><Report_
interval>
<CR><LF> <Converter number>,
<Report>,<Rate>,<Low>,<High>>
<Num_of_samples>
<Average_calc_duration><Report_
interval>
<CR><LF> <Converter number>,
<Report>,<Rate>,<Low>,<High>>
<Num_of_samples>
<Average_calc_duration><Report_
interval>
><CR><LF> <Converter number>,
<Report>,<Rate>,<Low>,<High>>
<Num_of_samples>
<Average_calc_duration><Report_
interval>
OK
AT+MMAD=? +MMAD:(range of
<Converter_Number>'s)
,(range of<Report>)
(range of <Rate>),(range of
<Low>),
(range of<High>), (range
of<Num_of_samples>)
,(range of<Average_calc_duration>
),(range of<Report_interval>)
OK
AT Commands Reference Manual
Response/Action Remarks
Read the setting of the A/D
converters.
Provides the range of the
parameters.
December 31, 2007