Fota Command For Automatic Mode (Transparent Mode) - Motorola G24 Guide Developer's Manual

+MFOTAREQ: 3
AT+MFOTARSP=0
OK
+MFOTAIND: 40, 19
// During the Update process, the phone will be in flash-mode. The update process is supposed to take a few
minutes.

FOTA Command for Automatic Mode (Transparent Mode)

In automatic/transparent mode, FOTA process include SW Upgrade without any user interaction.
In this case any +FOTREQ operational reports will not be sent toward DTE.
By setting AT+MFOTIND, the user can still get an indication on DTE.
The default mode is the transparent mode.
AT+MFOTACNFG?
+MFOTACNFG: 0
OK
AT+MFOTACNFG=1
OK
AT+MFOTACNFG? ?
+MFOTACNFG: 1
December 31, 2007
// Install package request
// Confirm the install process
// Update has started indication
// Get the FOTA DM session mode
// Mode is transparent
// Change the FOTA DM session mode to Non-Automatic
// Get the FOTA DM session mode
// Mode was set to non- transparent
AT Commands Reference Manual
Chapter 4: Using the Commands
4-35