Mfotainstl, Install The Fota Updated Package; Mfotaabort, Abort The Dm Session - Motorola G24 Guide Developer's Manual

Firmware Update Over the Air (FOTA)

+MFOTAINSTL, Install the FOTA Updated Package

Install the updated package if the conditions are met:
If update package was downloaded and OMA state is "Ready to update" then the module will
start update installation, otherwise, the module will reply with CME error: "operation not
allowed".
This command is a basic command.
In MUX mode, this AT command is allowed on DLC2 only.
Command
Type
Execute

+MFOTAABORT, Abort the DM Session

This command enables to abort the DM session. As a result, the FOTA activities above DM
session (interaction with the server and download) are stopped.
This command is a basic command.
In MUX mode, this AT command is allowed on DLC2 only.
Command
Type
Execute
Example
+MFOTAREQ: 2
AT+MFOTARSP=0
OK
+MFOTAIND: 10, 4
+MFOTAIND: 10, 5
+MFOTAIND: 10, 7
+MFOTAIND: 16, 14
+MFOTAIND: 16, 13, 0
+MFOTAIND: 16, 13, 5
AT +MFOTAABORT
OK
3-270
Syntax
AT+MFOTAINSTL OK
or:
+CME ERROR<err>
Syntax
+MFOTAABORT OK
or:
+CME ERROR<err>
// Download request
// Confirm the download operation
// DM Session in progress
// DM Session complete
// Download in progress
// Progress bar indication
// Progress bar indication
// Abort download
AT Commands Reference Manual
Response/Action
Install the updated package.
Response/Action
The Execute command aborts
the DM session.
OK is returned.
Remarks
Remarks
December 31, 2007