Nop - Compatible; Ignored (Compatible Only) Commands - Motorola G24 Guide Developer's Manual

NOP - Compatible

NOP - Compatible

IGNORED (Compatible Only) Commands

The following commands return OK, but do not execute any operation. They are only used to
provide backward compatibility.
Command
F
L
M
N
P
T
W
Y
&G
&J
&L
&M
&P
&Q
&R
&S
&T
\A
\G
\J
\K
\N
%C
\B
\K
+CBAND
3-422
Selects the line modulation standard
Monitors the speaker loudness
Monitors the speaker mode
Enables auto mode
Selects pulse dialing
Selects tone dialing
Wait for dial tone
Disconnects on long space
Selects the guard tone
Jack type selection
Leased line operation
Asynch/synch mode connection
Selects pulse dialing
Communications mode options
Selects the CTC controls
Defines the DSR behavior
Selects tone dialing
Sets the maximum MNP block size
Sets the use of the Xon/Xoff flow control
Adjusts the terminal auto rate
This command is supported for backward compatibility only, and has no effect.
Displays the link type
Enables/disables data compression
Transmits break to remote
Breaks control
Changes band frequencies
AT Commands Reference Manual
Description
December 31, 2007