Firmware Update Over The Air (Fota); Mfotawscfg, Set The Web-Session Default Entry - Motorola G24 Guide Developer's Manual

Firmware Update Over the Air (FOTA)

+MFOTAWSCFG, Set the Web-Session Default Entry

This command is a basic command that enables Web-session default entry setting.
In MUX mode, this command is allowed on DLC2 only.
In order to enable a client to connect to a server (for example: Bitfone/ RedBend servers), default
Web-Session must be configured in the client.
All AT+ MFOTAWSCFG settings will be saved in nvm and the last setting will be available after
power up.
Command
Type
Set
Read
Test
December 31, 2007
Syntax
AT+MFOTAWSCFG = OK
<SERVICE_TYPE>,
<PORT>, or:
<GPRS APN>,
<GPRS USER NAME>, +CME ERROR: <err>
<GPRS PASSWORD>
[,PROXY]
AT+MFOTAWSCFG? +MFOTAWSCFG:
<SERVICE_TYPE>,
<PORT>,
<GPRS APN>,
<GPRS USER NAME>
[,PROXY]
OK
AT+MFOTAWSCFG =? +MFOTAWSCFG:(list of
supported
<Service_type>),
<port range>
OK
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
The set command configures the
tones mode.
The read command returns the
current setting.
Test command returns the
supported service-types and the
port-range.
Remarks
3-265