Motorola G24 Guide Developer's Manual page 235

At commands
Hide thumbs Also See for G24 Guide:
Table of Contents

Advertisement

Command
Type
Test
The following table shows the +MEMAS parameters.
<Parameter>
<name>
<user_id>
<passw>
<return_addr>
<smtp_host>
<smtp_port>
December 31, 2007
Syntax
AT+MEMAS=?
Table 3-91: +MEMAS Parameters
String format. Indicate the user name that will be used with email address. The
maximum length is 24 characters.
String format. Indicate the User ID guidelines that shall be determined by the email
service provider. User ID is a required setting. This setting must be set before the user
can access email. There is no default setting for User ID. The valid characters are
ASCII characters. The maximum length is 48 characters.
String format. Indicate the Password guidelines that shall be determined by the email
service provider. Password is a required setting. This setting must be set before the
user can access email. There is no default setting for password. The valid characters
are ASCII characters. The maximum length is 40 characters.
String format. Return address information that shall be provided by the email service
provider (joe@test.com). Email can only be sent to valid Email addresses. Valid
email address must comply with the RFC 822 standard. The phone shall verify
address validity before accepting this setting. Return address is a required setting.
This setting must be set before the user can access email. There is no default setting
for return address. The maximum length is 100 characters.
String format. Sending host - Address for sending emails. (smtp.test.com). The SMTP
Host setting follows the guidelines as defined by RFC1035 (Domain names -
implementation and specification). The length of the SMTP Host setting is limited to
40 characters. SMTP host information shall be provided by the email service provider.
The sending host is required setting. valid characters are 'A'-'Z', 'a'-'z', '0'-'9', "-" and
".".
Sending port. Default value is 25. The minimum allow value is 0, the maximum
allowed value is 65535.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
+MEMAS: maximum
allowed length for
<name>, maximum
allowed length of
<user_id>, maximum
allowed length of <passw>,
maximum allowed length
of <return_addr>,
maximum allowed length
of <smtp_host>, list of
supported <smtp_port>s
values, maximum allowed
length of <pop3_host>, list
of supported <pop3_port>s
values.
OK
Description
Remarks
3-151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents