Clan, Me Language - Motorola G24 Guide Developer's Manual

<Parameter>
<ind>
<bfr>

+CLAN, ME Language

This command handles the selection of language in the ME.
The <code> parameter is a two-letter abbreviation of the language. The language codes, as
defined in ISO 639, consist of two characters, e.g. "DE", "EN" etc.
Command
Type
Set
Read
Test
The following table shows the +CLAN parameters.
<code>
DE
EN
IT
FR
ES
NL
SW
DA
PT
December 31, 2007
Table 3-206: +CMER Parameters (Cont.)
0 No indicator events reporting.
1 Indicator event +CIEV: <ind>,<value>.
<ind> shows the indicator order number and <value> is new value of indicator.
The default value is 0.
Controls the effect on buffered codes.
0 Clear buffer.
Syntax
AT+CLAN=<code> OK
or:
ERROR
AT+CLAN? +CLAN: <code>
AT+CLAN=? +CLAN: (list of <code>s)
Table 3-207: +CLAN Parameters
German
English
Italian
French
Spanish
Dutch
Swedish
Danish
Portuguese
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Response/Action
Description
Remarks
Set command sets the
selected language.
The read command displays
the currently selected lan-
guage.
Test command displays list of
supported language <code>s.
3-315