Sony ZRD-1 Installation Manual page 73

No. Description
1 Joint coma (BTM)
2 Joint coma (SIDE)
3 Screws
4 Y adjusting hole
5 Eccentric pin (long)
6 Shaft (BTM)
7 Z adjusting hole
8 Eccentric pin (short)
9 X positioning tool
10 X adjusting hole/X
positioning hole
11 Screws
12 X adjusting hole
13 Shaft (SIDE)
14 Z adjusting hole
Adjustment in the Z direction
The display unit moving direction varies depending on the position where the eccentric pin is inserted.
The eccentric pin rotating direction does not always match the display unit moving direction.
Depending on the position of the eccentric pin, when rotating the eccentric pin in the direction of "a",
sometimes the display unit moves in the Z direction and other times it moves in the Z' direction.
The display unit moving direction is not always the same each time.
Therefore, before aligning the display unit, check in which direction the display unit moves by slightly
rotating the eccentric pin.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Function/Usage
Joint or adjustment between the upper and lower
display units
Joint or adjustment between the left and right
display units
To secure the joint coma (BTM)
For adjustment in the Y direction
For adjustment in the X direction or Y direction
Joint between the upper and lower display units
For adjustment in the Z direction of horizontal
edge line
For adjustment in the Z direction or X direction
For positioning in the X direction
For adjustment in the X direction/For X position-
ing of the first display unit in the system
To secure the joint coma (SIDE)
For adjustment in the X direction
Joint between the left and right display units
For adjustment in the Z direction of vertical edge
line
Joint coma side
(fixed side)
Z
Display unit side
(moving side)
Remarks
Four pcs. on each joint coma (BTM)
Insert eccentric pin (long).
Supplied with unit alignment tool
Insert eccentric pin (short).
Supplied with unit alignment tool
Supplied with unit alignment tool
Insert eccentric pin (short) or X
positioning tool.
Two pcs. on each joint coma (SIDE)
Insert eccentric pin (long).
Insert eccentric pin (short).
Joint coma side
(fixed side)
a a'
Z' Eccentric pin Z
Display unit side
(moving side)
Z'
2-39 (E)