Sony ZRD-1 Installation Manual page 50

(3) Loosen the eight screws by rotating them about one turn. (4 pcs x 2 portions).
(4) Using the monitor of the unit alignment tool, set the distance (reference line) between the LED ele-
ment at the lowest end of the display unit and the end of the base.
. For details on the setting procedure, refer to the document supplied with the unit alignment tool.
. For the reference line, refer to the monitor screen example in step (5).
2-16 (E)
Screws
Screws
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200