6-3. Initial Settings
n
Configure the initial settings in the system standby state. Do not click [Power ON].
6-3-1. Controller Connection Setting
The Controller Connection setting enables the following items.
. The display controller and Display Control Software are connected.
. The display controller is set to be the primary controller or subordinate controller (hereafter referred to
as "sub controller").
. The display controllers communicate by linking with each other.
1. On the menu bar, click [Installation], click [Controller], and then click [Connection Settings]. (The
screen varies depending on the Display Control Software version.)
The Controller Connection Settings screen is displayed.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-7 (E)