Sony ZRD-1 Installation Manual page 166

DP Single/Single Stream Mode
[DP Single/Single Stream Mode] is available in the system that the display controller is ZRCT-200 model
and display control software's version is 1.22.0 or later.
To display the setting screen
1. On the menu bar of the Main screen, click [Array], and then click [Input Settings].
2. In the Input Settings screen, select a target display controller, and then click [Detailed Input Settings].
3. In the Detailed Input Settings screen, click the [DisplayPort (Single1)] tab or the [DisplayPort (Sin-
gle2)] tab depending on the connector that you want to set.
Setting screen
A-10 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200