Sony ZRD-1 Installation Manual page 143

System for 3D Frame Sequential mode (ZRCT-200 with version 1.22.0 or later)
Input the 3D video signal (60 Hz or 120 Hz) to the DisplayPort connectors and input the 3D sync signal to
the 3D SYNC IN connector. From the display controller, the 3D video signal (120 Hz) is output.
For the 3D video that is input to the display controller in 60 Hz, the signal is input in the order of L1
signal→R1 signal→L2 signal→R2 signal∙∙∙, and the same video is output twice by repetition in the order
of L1 signal→R1 signal→L1 signal→R1 signal→L2 signal→R2 signal→L2 signal→R2 signal∙∙∙.
For the 3D video that is input to the display controller in 120 Hz, the signal is input in the order of L1
signal→R1 signal→L2 signal→R2 signal∙∙∙, and the video is output in the order of L1 signal→R1
signal→L2 signal→R2 signal∙∙∙.
From the 3D SYNC OUT connector, the 3D sync signal is output in accordance with the picture output's
timing, and then the 3D sync signal controls 3D glasses via an emitter.
3D sync signal (60/120 Hz)
3D video signal (60 Hz)
60/120 Hz
L1 R1
For 3D video that is
input in 120 Hz
3D video signal (120 Hz)
L1 R1
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
3D SYNC IN 3D SYNC OUT
DisplayPort
L30 R30
L60 R60
3D sync signal (120 Hz)
3D video signal (120 Hz)
L1 R1 L1 R1 L30 R30 L30 R30
For 3D video that is
input in 120 Hz
3D video signal (120 Hz)
L1 R1 L60 R60
Emitter
6-47 (E)